宇航CAD齿轮软件全套内容如下：
ID_数控线切割 [数控线切割(CAM)]
ID_Mill_l_arc [铣(锣)直线_圆弧(&Mill-l-arc)]^C^C_Mill-l-arc
ID_Mill_l_arc_pl [铣(锣)直线_圆弧_多段线(&Mill-l-arc-pl)]^C^C_Mill-l-arc-pl
ID_Mill_l_arc_pl_sp_el [铣(锣)直线_圆弧_多段线_样条_椭圆(弧)(&Mill-l-arc-pl-sp-el)]^C^C_Mill-l-arc-pl-sp-el
ID_Mill_l_arc_sp_el [铣(锣)直线_圆弧_样条_椭圆(弧)(&Mill-l-arc-sp-el)]^C^C_Mill-l-arc-sp-el
ID_Mill_cut [雕铣(锣)直线_圆_圆弧_样条_多段线_椭圆(弧)(&Mill-cut)]^C^C_Mill-cut
ID_Wire_L_ARC [割直线_圆弧(&WIRE-L-ARC)]^C^C_Wire-L-ARC
ID_Wire_l_arc_pl [割直线_圆弧_多段线(&Wire-l-arc-pl)]^C^C_Wire-l-arc-pl
ID_Wire_l_arc_pl_sp_el [割直线_圆弧_多段线_样条_椭圆(弧)(&Wire-l-arc-pl-sp-el)]^C^C_Wire-l-arc-pl-sp-el
ID_Wire_L_ARC_SP_EL [割直线_圆弧_样条_椭圆(弧)(&Wire-L-ARC-SP-EL)]^C^C_Wire-L-ARC-SP-EL
ID_Wire_circle [割圆(&WIRE-circle)]^C^C_Wire-circle
ID_Check [反向检查G代码加工程序(&Check)]^C^C_Check
ID_Check3B [反向检查3B代码加工程序(&Check3B)]^C^C_Check3B
ID_Erase-by-layer [按图层删除实体(&Erase-by-layer)]^C^C_Erase-by-layer
ID_Erase-by-color [按颜色删除实体(&Erase-by-color)]^C^C_Erase-by-color
ID_Erase-by-entsort [按实体名删除实体(&Erase-by-entsort)]^C^C_Erase-by-entsort
ID_Gearwire [外齿轮及线切割(&Gearwire)]^C^C_Gearwire
ID_Igearwire [内齿轮及线切割(&Igearwire)]^C^C_Igearwire
ID_Gearwiredemo [外齿轮及线切割演示(&Gearwiredemo)]^C^C_Gearwiredemo
ID_Igearwiredemo [内齿轮及线切割演示(&Igearwiredemo)]^C^C_Igearwiredemo
ID_3Bwire_L_ARC [割直线_圆弧(&3Bwire-L-ARC)]^C^C_3Bwire-L-ARC
ID_3Bwire_l_arc_pl [割直线_圆弧_多段线(&3Bwire-l-arc-pl)]^C^C_3bwire-l-arc-pl
ID_3Bwire_L_ARC_SP_EL [割直线_圆弧_样条_椭圆弧(&3Bwire-L-ARC-SP)]^C^C_3Bwire-L-ARC-SP-EL
ID_3Bwire_l_arc_pl_sp_el [割直线_圆弧_多段线_样条_椭圆弧(&3Bwire-l-arc-pl-sp-el)]^C^C_3Bwire-l-arc-pl-sp-el
ID_3Bgearwire [外齿轮及线切割(&3Bgearwire)]^C^C_3Bgearwire
ID_3Bigearwire [内齿轮及线切割(&3Bigearwire)]^C^C_3Bigearwire
ID_3Bgearwiredemo [外齿轮及线切割演示(&3Bgearwiredemo)]^C^C_3Bgearwiredemo
ID_3Bigearwiredemo [内齿轮及线切割演示(&3Bigearwiredemo)]^C^C_3Bigearwiredemo
ID_Cycloidwiredemo [摆线轮及线切割演示(&Cycloidwiredemo)]^C^C_Cycloidwiredemo
ID_Lenth [走丝切割工件的轨迹长度(&Lenth)]^C^C_Lenth
ID_Sp-ellipse-to-arc [样条或椭圆(弧)转化为圆弧(&Sp-ellipse-to-arc)]^C^C_Sp-ellipse-to-arc
ID_Sp-to-line [样条转化为直线(&Sp-to-line)]^C^C_Sp-to-line
ID_Sp-to-arc [样条转化为圆弧(&Sp-to-arc)]^C^C_Sp-to-arc
ID_Line-arc-to-pline [直线和圆弧转化为多段线(&Line-arc-to-pline)]^C^C_Line-arc-to-pline
ID_NC_L_ARC [割直线_圆弧(&NC-L-ARC)]^C^C_NC-L-ARC
ID_NC_L_ARC_PL [割直线_圆弧_多段线(&NC-L-ARC-PL)]^C^C_NC-L-ARC-PL
ID_NCpassword [注册(&NCpassword)]^C^C_NCpassword
***POP13
**GEAR
ID_齿轮 [圆柱齿轮(cylindrical GEAR)]
ID_cgear [单个外变位齿轮试用(&CGEAR)]^C^C_CGEAR
ID_cz1z2 [变位外啮合齿轮副试用(&cz1z2)]^C^C_cz1z2
ID_Gear [单个外变位齿轮(&GEAR)]^C^C_GEAR
ID_igear [单个内变位齿轮(&IGEAR)]^C^C_igear
ID_z1z2 [变位外啮合齿轮副(&z1z2)]^C^C_z1z2
ID_iz1z2 [变位内啮合齿轮副(&iz1z2)]^C^C_iz1z2
ID_oz1z2 [变位外啮合齿轮副(&oz1z2)]^C^C_oz1z2
ID_z1z2z3 [内、外啮合齿轮副(&z1z2z3)]^C^C_z1z2z3
ID_solar [变位行星齿轮系(&solar)]^C^C_solar
ID_Gearwire [外齿轮及线切割(&Gearwire)]^C^C_Gearwire
ID_Igearwire [内齿轮及线切割(&Igearwire)]^C^C_Igearwire
ID_Helixx [斜齿轮螺旋线程序(&Helixx)]^C^C_Helixx
ID_Inv [渐开线函数(&Inv)]^C^C_Inv
ID_Ainv [反渐开线函数(&Ainv)]^C^C_Ainv
ID_Crec [按中心定位画矩形(&Crec)]^C^C_Crec
ID_Din [变位渐开线外花键(&DIN)]^C^C_din
ID_Idin [变位渐开线内齿轮(&IDIN)]^C^C_idin
ID_geardemo [外齿轮变位演示(&geardemo)]^C^C_geardemo
ID_igeardemo [内齿轮变位演示(&igeardemo)]^C^C_igeardemo
ID_z1z2demo [外啮合齿轮副演示(&z1z2demo)]^C^C_z1z2demo
ID_iz1z2demo [内啮合齿轮副演示(&iz1z2demo)]^C^C_iz1z2demo
ID_oz1z2demo [外啮合齿轮副演示(&oz1z2demo)]^C^C_oz1z2demo
ID_z1z2z3demo [内、外啮合齿轮副演示(&Z1Z2Z3demo)]^C^C_z1z2z3demo
ID_solardemo [变位行星齿轮系演示(&solardemo)]^C^C_solardemo
ID_Gearwiredemo [外齿轮及线切割演示(&Gearwiredemo)]^C^C_Gearwiredemo
ID_Igearwiredemo [内齿轮及线切割演示(&Igearwiredemo)]^C^C_Igearwiredemo
ID_Password [注册(&cgearpassword)]^C^C_cgearPassword
***POP14
**GEAR
ID_齿轮 [圆锥齿轮和蜗轮与蜗杆(Bevel and worm GEAR)]
ID_BevelGEAR [直齿圆锥齿轮副计算(&Bevelz1z2)]^C^C_Bevelz1z2
ID_HelBevelgear [斜齿圆锥齿轮副计算(&HelBevelz1z2)]^C^C_HelBevelz1z2
ID_ArcBevelz1z2 [格利森制弧齿圆锥齿轮副计算(&ArcBevelz1z2)]^C^C_ArcBevelz1z2
ID_Beveltooth [直齿圆锥齿轮精确建模(&Beveltooth)]^C^C_Beveltooth
ID_helBeveltooth [斜齿圆锥齿轮精确建模(&helBeveltooth)]^C^C_helBeveltooth
ID_ArcBeveltooth [格利森制弧齿圆锥齿轮精确建模(&ArcBeveltooth)]^C^C_ArcBeveltooth
ID_ArcBevelhelix [弧齿(格利森制)圆锥齿轮螺旋线(&ArcBevelhelix)]^C^C_ArcBevelhelix
ID_Belz1z2 [直齿圆锥齿轮副端面当量齿形计算与绘图(&Belz1z2)]^C^C_Belz1z2
ID_Helixz1z2 [螺旋齿圆锥齿轮副端面当量齿形计算与绘图(&Helixz1z2)]^C^C_Helixz1z2
ID_Bevelgeardemo [直齿圆锥齿轮副计算演示(&Bevelz1z2demo)]^C^C_Bevelz1z2demo
ID_HelBevelgeardemo [斜齿圆锥齿轮副计算演示(&HelBevelz1z2demo)]^C^C_HelBevelz1z2demo
ID_ArcBevelgeardemo [弧齿(格利森制)圆锥齿轮副计算演示(&ArcBevelz1z2demo)]^C^C_ArcBevelz1z2demo
ID_Beveltoothdemo [直齿圆锥齿轮精确建模演示(&Beveltoothdemo)]^C^C_Beveltoothdemo
ID_helBeveltoothdemo [斜齿圆锥齿轮精确建模演示(&helBeveltoothdemo)]^C^C_helBeveltoothdemo
ID_ArcBeveltoothdemo [格利森制弧齿圆锥齿轮精确建模演示(&ArcBeveltoothdemo)]^C^C_ArcBeveltoothdemo
ID_WormGEAR [普通圆柱蜗杆传动计算(&WormGEAR)]^C^C_WormGEAR
ID_WormGEARdemo [普通圆柱蜗杆传动计算演示(&WormGEARdemo)]^C^C_WormGEARdemo
ID_Arctoothz1z2demo [弧齿(格利森制)圆锥齿轮副建模(&Arctoothz1z2demo)]^C^C_Arctoothz1z2demo
ID_Password [注册(&Bevelpassword)]^C^C_BevelPassword
***POP15
**NON-CIRCLE-GEAR
ID_非圆齿轮 [非圆齿轮(NonCircleGear)]
ID_eabgear [一阶椭圆变位齿轮(&eabgear)]^C^C_eabgear
ID_e1gear [一阶椭圆变位齿轮(&e1gear)]^C^C_e1gear
ID_e1rack [一阶椭圆变位齿条(&e1rack)]^C^C_e1rack
ID_e2gear [二阶卵形变位齿轮(&e2gear)]^C^C_e2gear
ID_e2rack [二阶卵形变位齿条(&e2rack)]^C^C_e2rack
ID_e3gear [三阶椭圆变位齿轮(&e3gear)]^C^C_e3gear
ID_e3rack [三阶椭圆变位齿条(&e3rack)]^C^C_e3rack
ID_e4gear [四阶椭圆变位齿轮(&e4gear)]^C^C_e4gear
ID_e4rack [四阶椭圆变位齿条(&e4rack)]^C^C_e4rack
ID_e5gear [五阶椭圆变位齿轮(&e5gear)]^C^C_e5gear
ID_e5rack [五阶椭圆变位齿条(&e5rack)]^C^C_e5rack
ID_egear [N 阶椭圆变位齿轮(&egear)]^C^C_egear
ID_logear [对数螺旋线变位齿轮(&logear)]^C^C_logear
ID_curvegear [任意曲线变位齿轮(&curvegear)]^C^C_curvegear
ID_NonCircleGearCurve [求节曲线(&NonCircleGearCurve)]^C^C_NonCircleGearCurve
ID_Ellipse_gear_demo [1阶椭圆齿轮演示(&EabgearDemo)]^C^C_EabgearDemo
ID_Ellipse_gear_demo [1阶椭圆齿轮演示(&E1gearDemo)]^C^C_E1gearDemo
ID_Ellipse_gear_demo [2阶椭圆齿轮演示(&E2gearDemo)]^C^C_E2gearDemo
ID_Ellipse_gear_demo [3阶椭圆齿轮演示(&E3gearDemo)]^C^C_E3gearDemo
ID_Ellipse_gear_demo [4阶椭圆齿轮演示(&E4gearDemo)]^C^C_E4gearDemo
ID_Ellipse_gear_demo [5阶椭圆齿轮演示(&E5gearDemo)]^C^C_E5gearDemo
ID_y=hsinkx [正弦曲线(&y=hsinkx)]^C^C_y=hsinkx
ID_y=hcoskx [余弦曲线(&y=hcoskx)]^C^C_y=hcoskx
ID_y=heth [对数螺旋线曲线(&y=heth)]^C^C_y=heth
ID_y=kx2 [二次曲线(&y=kx2)]^C^C_y=kx2
ID_y=kx3 [三次曲线(&y=kx3)]^C^C_y=kx3
ID_y=inv [渐开线(&y=inv)]^C^C_y=inv
ID_Spline-from-file [从文件中导入样条曲线(&Spline-from-file)]^C^C_Spline-from-file
ID_Password [注册(&egearPassword)]^C^C_egearPassword
***POP16
**CYCLOID
ID_摆线针轮行星 [摆线针轮行星(CYCLOID)]
ID_Cycloid [摆线针轮行星(&Cycloid)]^C^C_Cycloid
ID_Cycloidemo [摆线针轮行星演示(&Cycloidemo)]^C^C_Cycloidemo
ID_Cycloid2z [二齿差摆线针轮行星(&Cycloid2z)]^C^C_Cycloid2z
ID_Cycloid2zdemo [二齿差摆线针轮行星演示(&Cycloid2zdemo)]^C^C_Cycloid2zdemo
ID_Cycloidwire [摆线轮及线切割(&Cycloidwire)]^C^C_Cycloidwire
ID_Cycloidwiredemo [摆线轮及线切割演示(&Cycloidwiredemo)]^C^C_Cycloidwiredemo
ID_Check [反向检查G代码加工程序(&Check)]^C^C_Check
ID_Check3B [反向检查3B代码加工程序(&Check3B)]^C^C_Check3B
ID_Cycloidpassword [注册(&Cycloidpassword)]^C^C_Cycloidpassword
***POP17
**expression curve
ID_公式曲线 [公式曲线(expression curve)]
ID_y=hsinkx [正弦曲线(&y=hsinkx)]^C^C_y=hsinkx
ID_y=hcoskx [余弦曲线(&y=hcoskx)]^C^C_y=hcoskx
ID_y=heth [对数螺旋线曲线(&y=heth)]^C^C_y=heth
ID_y=kx2 [二次曲线(&y=kx2)]^C^C_y=kx2
ID_y=kx3 [三次曲线(&y=kx3)]^C^C_y=kx3
ID_y=inv [渐开线(&y=inv)]^C^C_y=inv
ID_Spline-from-file [从文件中导入样条曲线(&Spline-from-file)]^C^C_Spline-from-file
产品用途：复杂的机械传动系统设计与强度校核计算、齿轮设计绘图、3D齿轮精密建模、高精密齿轮加工(0级以上)
软件优势:复杂的机械传动系统设计、齿轮绘图、3D齿轮精确建模、强度校核计算及数控线切割加工编程(同时生成G代码和3B代码),一个人可轻松地完成.
软件支持AutoCAD、中望CAD、浩辰CAD，全自动齿根曲线内、外变位齿轮、齿轮副、行星系、非圆齿轮、摆线针轮行星、渐开线变位花键(德国DIN5480,GB国标,...)、圆锥齿轮(直齿锥齿轮,斜齿锥齿轮,弧齿锥齿轮,零度弧齿锥齿轮)及蜗轮与蜗杆 软件(几何计算、精确建模及强度校核计算)
生产高精度齿轮离不开齿轮软件
一些生产设备需0级高精度齿轮,例如生产芯片的光刻机,齿轮传动不能有丝毫误差.这种设备也异乎寻常地昂贵,一套上亿元.而且西方国家还不愿卖给中国,严格控制向中国输出.
中国要生产此种设备,首先要解决高精度齿轮的生产问题.生产0级高精度齿轮,普通的滚,剃,磨达不到要求.如果没有齿轮软件,就生产不出此类高精度的齿轮.
宇航CAD齿轮软件按双精度计算,输出按小数点后第八位.精确到小数点后第三位就是微米,第八位就小于纳米了.采用宇航CAD齿轮软件绘出精准的齿轮图后,慢走丝线切割加工,就可生产出0级高精度齿轮,能满足高精密传动的要求,而且成本低廉.
使用说明:
1.在AutoCAD中增加一个命令:
在AutoCAD中,如果要加载运行cgear.vlx,点菜单下的"工具tools",点"加载应用程序(load application...)",再点此程序cgear.vlx,点"加载load"按钮,点"关闭close"按钮. 在AutoCAD的命令(Command:)下,输入cgear命令,输入相关参数,就可自动画出一个齿轮.运行其它vlx程序类同.
中望CAD2011上加载方法,在COMMAND命令下,输入(load"cgear.VLX"),再输入cgear命令即可运行.在AutoCAD、浩辰CAD中也可这么加载运行.
2.让增加的命令永存于AutoCAD中:
为使cgear命令在AutoCAD中永存,点"加载应用程序(loadapplication...)"后,再点"内容",点"添加",点此程序cgear.vlx,再点"添加",点"关闭close"按钮.下次运行AutoCAD就无须再加载cgear.vlx,cgear命令将永驻于AUTOCAD中.
3.在AutoCAD中增加和使用下拉式菜单:
把AeroCAD.mnu拷贝到AutoCAD运行menu命令显示的目录下,在AutoCAD的命令(Command:)下,输入menu,点AeroCAD.mnu,加载菜单,就可点击下拉式菜单命令.例如,点cgear命令.
或者把以下菜单复制到你的ACAD.MNU菜单文件的最末尾,再在AutoCAD的命令(Command:)下,输入menu,点acad.mnu,加载菜单,就可使用下拉式菜单命令.
//
// Begin AutoCAD Pull-down Menus
//
***
***POP12
**CAM
ID_数控线切割 [数控线切割(CAM)]
ID_Mill_l_arc [铣(锣)直线_圆弧(&Mill-l-arc)]^C^C_Mill-l-arc
ID_Mill_l_arc_pl [铣(锣)直线_圆弧_多段线(&Mill-l-arc-pl)]^C^C_Mill-l-arc-pl
ID_Mill_l_arc_pl_sp_el [铣(锣)直线_圆弧_多段线_样条_椭圆(弧)(&Mill-l-arc-pl-sp-el)]^C^C_Mill-l-arc-pl-sp-el
ID_Mill_l_arc_sp_el [铣(锣)直线_圆弧_样条_椭圆(弧)(&Mill-l-arc-sp-el)]^C^C_Mill-l-arc-sp-el
ID_Mill_cut [雕铣(锣)直线_圆_圆弧_样条_多段线_椭圆(弧)(&Mill-cut)]^C^C_Mill-cut
ID_Wire_L_ARC [割直线_圆弧(&WIRE-L-ARC)]^C^C_Wire-L-ARC
ID_Wire_l_arc_pl [割直线_圆弧_多段线(&Wire-l-arc-pl)]^C^C_Wire-l-arc-pl
ID_Wire_l_arc_pl_sp_el [割直线_圆弧_多段线_样条_椭圆(弧)(&Wire-l-arc-pl-sp-el)]^C^C_Wire-l-arc-pl-sp-el
ID_Wire_L_ARC_SP_EL [割直线_圆弧_样条_椭圆(弧)(&Wire-L-ARC-SP-EL)]^C^C_Wire-L-ARC-SP-EL
ID_Wire_circle [割圆(&WIRE-circle)]^C^C_Wire-circle
ID_Check [反向检查G代码加工程序(&Check)]^C^C_Check
ID_Check3B [反向检查3B代码加工程序(&Check3B)]^C^C_Check3B
ID_Erase-by-layer [按图层删除实体(&Erase-by-layer)]^C^C_Erase-by-layer
ID_Erase-by-color [按颜色删除实体(&Erase-by-color)]^C^C_Erase-by-color
ID_Erase-by-entsort [按实体名删除实体(&Erase-by-entsort)]^C^C_Erase-by-entsort
ID_Gearwire [外齿轮及线切割(&Gearwire)]^C^C_Gearwire
ID_Igearwire [内齿轮及线切割(&Igearwire)]^C^C_Igearwire
ID_Gearwiredemo [外齿轮及线切割演示(&Gearwiredemo)]^C^C_Gearwiredemo
ID_Igearwiredemo [内齿轮及线切割演示(&Igearwiredemo)]^C^C_Igearwiredemo
ID_3Bwire_L_ARC [割直线_圆弧(&3Bwire-L-ARC)]^C^C_3Bwire-L-ARC
ID_3Bwire_l_arc_pl [割直线_圆弧_多段线(&3Bwire-l-arc-pl)]^C^C_3bwire-l-arc-pl
ID_3Bwire_L_ARC_SP_EL [割直线_圆弧_样条_椭圆弧(&3Bwire-L-ARC-SP)]^C^C_3Bwire-L-ARC-SP-EL
ID_3Bwire_l_arc_pl_sp_el [割直线_圆弧_多段线_样条_椭圆弧(&3Bwire-l-arc-pl-sp-el)]^C^C_3Bwire-l-arc-pl-sp-el
ID_3Bgearwire [外齿轮及线切割(&3Bgearwire)]^C^C_3Bgearwire
ID_3Bigearwire [内齿轮及线切割(&3Bigearwire)]^C^C_3Bigearwire
ID_3Bgearwiredemo [外齿轮及线切割演示(&3Bgearwiredemo)]^C^C_3Bgearwiredemo
ID_3Bigearwiredemo [内齿轮及线切割演示(&3Bigearwiredemo)]^C^C_3Bigearwiredemo
ID_Cycloidwiredemo [摆线轮及线切割演示(&Cycloidwiredemo)]^C^C_Cycloidwiredemo
ID_Lenth [走丝切割工件的轨迹长度(&Lenth)]^C^C_Lenth
ID_Sp-ellipse-to-arc [样条或椭圆(弧)转化为圆弧(&Sp-ellipse-to-arc)]^C^C_Sp-ellipse-to-arc
ID_Sp-to-line [样条转化为直线(&Sp-to-line)]^C^C_Sp-to-line
ID_Sp-to-arc [样条转化为圆弧(&Sp-to-arc)]^C^C_Sp-to-arc
ID_Line-arc-to-pline [直线和圆弧转化为多段线(&Line-arc-to-pline)]^C^C_Line-arc-to-pline
ID_NC_L_ARC [割直线_圆弧(&NC-L-ARC)]^C^C_NC-L-ARC
ID_NC_L_ARC_PL [割直线_圆弧_多段线(&NC-L-ARC-PL)]^C^C_NC-L-ARC-PL
ID_NCpassword [注册(&NCpassword)]^C^C_NCpassword
***POP13
**GEAR
ID_齿轮 [圆柱齿轮(cylindrical GEAR)]
ID_cgear [单个外变位齿轮试用(&CGEAR)]^C^C_CGEAR
ID_cz1z2 [变位外啮合齿轮副试用(&cz1z2)]^C^C_cz1z2
ID_Gear [单个外变位齿轮(&GEAR)]^C^C_GEAR
ID_igear [单个内变位齿轮(&IGEAR)]^C^C_igear
ID_z1z2 [变位外啮合齿轮副(&z1z2)]^C^C_z1z2
ID_iz1z2 [变位内啮合齿轮副(&iz1z2)]^C^C_iz1z2
ID_oz1z2 [变位外啮合齿轮副(&oz1z2)]^C^C_oz1z2
ID_z1z2z3 [内、外啮合齿轮副(&z1z2z3)]^C^C_z1z2z3
ID_solar [变位行星齿轮系(&solar)]^C^C_solar
ID_Gearwire [外齿轮及线切割(&Gearwire)]^C^C_Gearwire
ID_Igearwire [内齿轮及线切割(&Igearwire)]^C^C_Igearwire
ID_Helixx [斜齿轮螺旋线程序(&Helixx)]^C^C_Helixx
ID_Inv [渐开线函数(&Inv)]^C^C_Inv
ID_Ainv [反渐开线函数(&Ainv)]^C^C_Ainv
ID_Crec [按中心定位画矩形(&Crec)]^C^C_Crec
ID_Din [变位渐开线外花键(&DIN)]^C^C_din
ID_Idin [变位渐开线内齿轮(&IDIN)]^C^C_idin
ID_geardemo [外齿轮变位演示(&geardemo)]^C^C_geardemo
ID_igeardemo [内齿轮变位演示(&igeardemo)]^C^C_igeardemo
ID_z1z2demo [外啮合齿轮副演示(&z1z2demo)]^C^C_z1z2demo
ID_iz1z2demo [内啮合齿轮副演示(&iz1z2demo)]^C^C_iz1z2demo
ID_oz1z2demo [外啮合齿轮副演示(&oz1z2demo)]^C^C_oz1z2demo
ID_z1z2z3demo [内、外啮合齿轮副演示(&Z1Z2Z3demo)]^C^C_z1z2z3demo
ID_solardemo [变位行星齿轮系演示(&solardemo)]^C^C_solardemo
ID_Gearwiredemo [外齿轮及线切割演示(&Gearwiredemo)]^C^C_Gearwiredemo
ID_Igearwiredemo [内齿轮及线切割演示(&Igearwiredemo)]^C^C_Igearwiredemo
ID_Password [注册(&cgearpassword)]^C^C_cgearPassword
***POP14
**GEAR
ID_齿轮 [圆锥齿轮和蜗轮与蜗杆(Bevel and worm GEAR)]
ID_BevelGEAR [直齿圆锥齿轮副计算(&Bevelz1z2)]^C^C_Bevelz1z2
ID_HelBevelgear [斜齿圆锥齿轮副计算(&HelBevelz1z2)]^C^C_HelBevelz1z2
ID_ArcBevelz1z2 [格利森制弧齿圆锥齿轮副计算(&ArcBevelz1z2)]^C^C_ArcBevelz1z2
ID_Beveltooth [直齿圆锥齿轮精确建模(&Beveltooth)]^C^C_Beveltooth
ID_helBeveltooth [斜齿圆锥齿轮精确建模(&helBeveltooth)]^C^C_helBeveltooth
ID_ArcBeveltooth [格利森制弧齿圆锥齿轮精确建模(&ArcBeveltooth)]^C^C_ArcBeveltooth
ID_ArcBevelhelix [弧齿(格利森制)圆锥齿轮螺旋线(&ArcBevelhelix)]^C^C_ArcBevelhelix
ID_Belz1z2 [直齿圆锥齿轮副端面当量齿形计算与绘图(&Belz1z2)]^C^C_Belz1z2
ID_Helixz1z2 [螺旋齿圆锥齿轮副端面当量齿形计算与绘图(&Helixz1z2)]^C^C_Helixz1z2
ID_Bevelgeardemo [直齿圆锥齿轮副计算演示(&Bevelz1z2demo)]^C^C_Bevelz1z2demo
ID_HelBevelgeardemo [斜齿圆锥齿轮副计算演示(&HelBevelz1z2demo)]^C^C_HelBevelz1z2demo
ID_ArcBevelgeardemo [弧齿(格利森制)圆锥齿轮副计算演示(&ArcBevelz1z2demo)]^C^C_ArcBevelz1z2demo
ID_Beveltoothdemo [直齿圆锥齿轮精确建模演示(&Beveltoothdemo)]^C^C_Beveltoothdemo
ID_helBeveltoothdemo [斜齿圆锥齿轮精确建模演示(&helBeveltoothdemo)]^C^C_helBeveltoothdemo
ID_ArcBeveltoothdemo [格利森制弧齿圆锥齿轮精确建模演示(&ArcBeveltoothdemo)]^C^C_ArcBeveltoothdemo
ID_WormGEAR [普通圆柱蜗杆传动计算(&WormGEAR)]^C^C_WormGEAR
ID_WormGEARdemo [普通圆柱蜗杆传动计算演示(&WormGEARdemo)]^C^C_WormGEARdemo
ID_Arctoothz1z2demo [弧齿(格利森制)圆锥齿轮副建模(&Arctoothz1z2demo)]^C^C_Arctoothz1z2demo
ID_Password [注册(&Bevelpassword)]^C^C_BevelPassword
***POP15
**NON-CIRCLE-GEAR
ID_非圆齿轮 [非圆齿轮(NonCircleGear)]
ID_eabgear [一阶椭圆变位齿轮(&eabgear)]^C^C_eabgear
ID_e1gear [一阶椭圆变位齿轮(&e1gear)]^C^C_e1gear
ID_e1rack [一阶椭圆变位齿条(&e1rack)]^C^C_e1rack
ID_e2gear [二阶卵形变位齿轮(&e2gear)]^C^C_e2gear
ID_e2rack [二阶卵形变位齿条(&e2rack)]^C^C_e2rack
ID_e3gear [三阶椭圆变位齿轮(&e3gear)]^C^C_e3gear
ID_e3rack [三阶椭圆变位齿条(&e3rack)]^C^C_e3rack
ID_e4gear [四阶椭圆变位齿轮(&e4gear)]^C^C_e4gear
ID_e4rack [四阶椭圆变位齿条(&e4rack)]^C^C_e4rack
ID_e5gear [五阶椭圆变位齿轮(&e5gear)]^C^C_e5gear
ID_e5rack [五阶椭圆变位齿条(&e5rack)]^C^C_e5rack
ID_egear [N 阶椭圆变位齿轮(&egear)]^C^C_egear
ID_logear [对数螺旋线变位齿轮(&logear)]^C^C_logear
ID_curvegear [任意曲线变位齿轮(&curvegear)]^C^C_curvegear
ID_NonCircleGearCurve [求节曲线(&NonCircleGearCurve)]^C^C_NonCircleGearCurve
ID_Ellipse_gear_demo [1阶椭圆齿轮演示(&EabgearDemo)]^C^C_EabgearDemo
ID_Ellipse_gear_demo [1阶椭圆齿轮演示(&E1gearDemo)]^C^C_E1gearDemo
ID_Ellipse_gear_demo [2阶椭圆齿轮演示(&E2gearDemo)]^C^C_E2gearDemo
ID_Ellipse_gear_demo [3阶椭圆齿轮演示(&E3gearDemo)]^C^C_E3gearDemo
ID_Ellipse_gear_demo [4阶椭圆齿轮演示(&E4gearDemo)]^C^C_E4gearDemo
ID_Ellipse_gear_demo [5阶椭圆齿轮演示(&E5gearDemo)]^C^C_E5gearDemo
ID_y=hsinkx [正弦曲线(&y=hsinkx)]^C^C_y=hsinkx
ID_y=hcoskx [余弦曲线(&y=hcoskx)]^C^C_y=hcoskx
ID_y=heth [对数螺旋线曲线(&y=heth)]^C^C_y=heth
ID_y=kx2 [二次曲线(&y=kx2)]^C^C_y=kx2
ID_y=kx3 [三次曲线(&y=kx3)]^C^C_y=kx3
ID_y=inv [渐开线(&y=inv)]^C^C_y=inv
ID_Spline-from-file [从文件中导入样条曲线(&Spline-from-file)]^C^C_Spline-from-file
ID_Password [注册(&egearPassword)]^C^C_egearPassword
***POP16
**CYCLOID
ID_摆线针轮行星 [摆线针轮行星(CYCLOID)]
ID_Cycloid [摆线针轮行星(&Cycloid)]^C^C_Cycloid
ID_Cycloidemo [摆线针轮行星演示(&Cycloidemo)]^C^C_Cycloidemo
ID_Cycloid2z [二齿差摆线针轮行星(&Cycloid2z)]^C^C_Cycloid2z
ID_Cycloid2zdemo [二齿差摆线针轮行星演示(&Cycloid2zdemo)]^C^C_Cycloid2zdemo
ID_Cycloidwire [摆线轮及线切割(&Cycloidwire)]^C^C_Cycloidwire
ID_Cycloidwiredemo [摆线轮及线切割演示(&Cycloidwiredemo)]^C^C_Cycloidwiredemo
ID_Check [反向检查G代码加工程序(&Check)]^C^C_Check
ID_Check3B [反向检查3B代码加工程序(&Check3B)]^C^C_Check3B
ID_Cycloidpassword [注册(&Cycloidpassword)]^C^C_Cycloidpassword
***POP17
**expression curve
ID_公式曲线 [公式曲线(expression curve)]
ID_y=hsinkx [正弦曲线(&y=hsinkx)]^C^C_y=hsinkx
ID_y=hcoskx [余弦曲线(&y=hcoskx)]^C^C_y=hcoskx
ID_y=heth [对数螺旋线曲线(&y=heth)]^C^C_y=heth
ID_y=kx2 [二次曲线(&y=kx2)]^C^C_y=kx2
ID_y=kx3 [三次曲线(&y=kx3)]^C^C_y=kx3
ID_y=inv [渐开线(&y=inv)]^C^C_y=inv
ID_Spline-from-file [从文件中导入样条曲线(&Spline-from-file)]^C^C_Spline-from-file
本产品采用注册码加密，购买后可以在线下载正式安装盘，同时付款后3天内免费发送光盘介质安装程序！